• Request a quote 951-735-3612

  • Water Clarity begins & ends with filtration

    August 3, 2016

    by Marcelle Cibrell

    When it comes to water quality, the pool and spa service professional has two goals: making the water safe and free of any disease-carrying bacteria, and ensuring that the pool and spa look inviting. The first goal is usually accomplished by employing some type of sanitizer. For the second, adequate filtration to remove solids that are not only unsightly, but worse, can interfere with the disinfection process. Because while it may be be acceptable for the local pond or watering hole, suspended solids make swimming pool and spa look cloudy, murky and unappealing. When a pool or spa filter is operating at maximum efficiency and used in conjunction with proper chemical treatment, the properly sized filter will help keep pools both safe and sparkling. Filters eliminate the small suspended particles to make the water visibly inviting. Because even if you can show your customers that the water is safe with a test kit, not many people will want to dive in if the water is cloudy, dull or dirty looking. Water clarity is important for a number of reason.

    In addition to simple aesthetics, the increased visibility afforded by a good filter provides for a safer bather environment, with less of a drowning risk. Consumers may not be aware that numerous drowning events have occurred simply because the victim was not clearly visible through the cloudy water. But in addition, to the drowning disk, cloudy water can help to facilitate an algae bloom, or be a sign that one has already begun. Cloudy water can also be a sign that water balance parameters have gone out of control. For those reasons, and more, it is essential to ensure that water clarity is maintained, and filters accomplish much of this important task. Filter performance is determined by the clarity or turbidity of the water. The National Sanitation Foundation is nephelometric turbidity units measured with a nepholometer. The standard for public pools is 0.5 NTU’s although up to 1.0 NTU is allowed for up to 6 hours.

    For residential pools, which do not have to conform to NSF standards, water clarity is generally determined visually. The rule of thumb is that the water has good clarity if ” heads or tails” is visible on a coin tossed in the deep end. But regardless of the coin, if the water appears cloudy or hazy, there’s a problem requiring remedial action beginning with chemical testing. If proper water balance and sanitation has been maintained, the filter may be improperly sized, improperly maintained, or not given adequate given adequate filtration time.

error: Content is protected !!