Clean & Clear® Plus
Cartridge Filters
Fiberglass Reinforced Polypropylene Tank
Clean & Clear Plus Filters have a corrosion resistant injection molded filter tank featuring superior strength and reliability. The cartridge assembly uses four easy to clean, non-woven, polyester cartridges. Each filter is supplied with a bulkhead union set for easy installation.
Features
- NSF listed
- Superior strength
- Large filter area for increased dirt capacity
- 1-1/2 in., 100% drain clean-out port
- Continuous High Flow™ Internal Air Relief*
- Injection molded tank
- Balanced hydraulic flow
- Tension Control™ Clamp
- 100% factory tested
- Black bulkhead unions
- High Flow manual air relief valve
Note: Actual system flow will depend on plumbing size and other system components.
Note: Pentair Aquatic Systems does not recommend flow rates above 150 GPM.
*Integrated Continuous High Flow Internal Air Relief is operational only when there is unobstructed flow in the circulating system.
Operating Limits – maximum continual operating pressure of 50 PSI. Pool.spa (bather) applications, maximum operating water temperature (internal filter) 104 degrees F (40 degrees C).
Note: Pentair Aquatic Systems does not recommend flow rates above 150 GPM.
*Integrated Continuous High Flow Internal Air Relief is operational only when there is unobstructed flow in the circulating system.
Operating Limits – maximum continual operating pressure of 50 PSI. Pool.spa (bather) applications, maximum operating water temperature (internal filter) 104 degrees F (40 degrees C).
Certifications
pentair pool.com
Crystal Clear Water the easy Way
The Clean & Clear Plus filter combines top-end filter performance
with low maintenance. This dependable design uses special filter
elements to strip tiny particles from your pool water…particles as
small as 20 microns (an average grain of beach sand is 1,000
microns). Our four-cartridge design provides maximum filter surface
area to capture more dirt and extend time between cleanings. And
cleaning is a snap—open the top, remove the cartridges, hose them
off and the Clean & Clear Plus filter is ready to go again.
We’ve maximized cartridge surface consistency to block and trap
the maximum amount of solids, plus we use the most durable
materials to extend cartridge life. The Clean & Clear Plus filter
delivers commercial-grade performance that keeps pools clean
and sparkling, day in and day out.
•
Four-cartridge design traps more dirt and extends time
between cleanings.
•
Cartridges are easy to remove and rinse.
•
Clamp ring allows easier access to cartridges and internal
parts to speed service routines.
•
1½” drain is easy to access and located to ensure
complete draining during winterization.
•
Fiberglass-reinforced polypropylene tank is strong and
corrosion resistant for extra long life.
The Eco Select brand identifies our“greenest” and
most efficient equipment choices. Water flows very
efficiently through the Clean & Clear Plus filter,
often allowing the use of smaller pumps or lower
pump speeds to minimize energy use. And when
you rinse cartridges rather than backwash, you
can significantly reduce water use, too